Stainless Steel Meltblown Cloth Heater

Home > Products > Electric Process Heater > Stainless Steel Meltblown Cloth Heater

Stainless Steel Meltblown Cloth Heater

An air heater is an electric heating device that primarily heats a gas stream. The heating element of the air heater is a stainless steel electric heating tube, and the heater inner cavity is provided with a plurality of baffles to guide the gas flow direction, prolonging the residence time of the gas in the inner cavity, so that make the gas even heating to improve heat exchange efficiency.

E-mail: qianli@jsryan.com
whatsapp: +86-15371113672

Share This Product:

General Description
Parameters
Features
Typical Applications
Specification

An air heater is an electric heating device that primarily heats a gas stream. The heating element of the air heater is a stainless steel electric heating tube, and the heater inner cavity is provided with a plurality of baffles to guide the gas flow direction, prolonging the residence time of the gas in the inner cavity, so that make the gas even heating to improve heat exchange efficiency. The heating element of the air heater is a stainless steel heating tube which is filled with a heating wire in a seamless steel pipe, and the gap portion is filled with a magnesium oxide powder shrink tube having good thermal conductivity and insulation. When the current passes through the high temperature resistance wire, the generated heat is diffused to the surface of the heating tube by the crystalline magnesium oxide powder, and then transferred to the heated air to achieve the purpose of heating.

Duct Air Heater
Specification: Low Temp. Medium Temp. High Temp
Gas Pressure: ≤ 0.3kg/cm2
Gas Heating Temp: ≤160 °C for Low Temp. Type
Gas Heating Temp: ≤260 °C for Medium Temp. Type
Gas Heating Temp: ≤500 °C for High Temp. Type

Pipe Air Heater
Gas Heating Temp.: 650 °C
Material: Stainless Steel
Heating element: stainless steel electric heating tube

Model	GYK	Environmental Impact	No pollution
Heating Method	Air heating	Power	To be customized
Specification	To be customized	Voltage	380V
Fan	To be customized	Temp. Control	0-650 °C

High thermal efficiency

1
Heat up and cool fast

2
Fast adjustment but stability

3
Durable and long service life

4
Air clean and small volume

5

Pipe air heater has been widely used in many research and production laboratories such as aerospace, weapons industry, chemical industry and higher education institutions. Particularly suitable for automatic temperature control and large flow high temperature combined system and accessory test.

Delivery & Package

Delivery time: Machine will be shipped within 30 working days (or on request) after payment, our technician will test the machine well before shipment, so our customers can use directly when got the machine.
Packing: plywood case. Machine will be wrapped with plastic film and then put into plywood cases before cleaning.

package
shipment

I. Safety Instruction

Thanks for purchasing this product from our company!

Please take care of this manual and ensure you have fully read this manual before operation .

DANGER:

1. Do not place the machine in the places where have flammable and explosive

materials.

2. Make sure it’s off power before carry, connection, test.

3. Do not touch any electric terminal when the machine is running.

4. Wet hand is not allowed to touch the machine.

5. Do not touch any exposed conductive part of the machine.

II. Rationale

1. The air is forced into the air heater by the air compressor，and the max temperature of the air can reach to 350℃，the temperature can be adjust by the temperature controller.

2. The signal of the outlet temperature is provided by the thermocouple which is installed in the outlet pipe.

3. When the temperature controller received the signal from the thermocouple, then the temperature controller will drive the SCR to work.

4. There’s another thermocouple which is installed in the flange heater, once the heater overheat, the thermocouple would output the signal and then the heater would shut down automatically.

5. Power: 380V 50Hz.

III. Specification

1. Medium: air

2. Flow: 1800m³/h

3. Working pressure: 0.15Mpa

4. Design pressure: 0.19Mpa

5. Working temperature: inlet - 20℃, outlet - max 350℃

6. Heating power: 300KW

7. Power: 380V 50Hz, 3 phase

8. Heating element: ‘U’ type, 3600W, 90pcs, 2.05W/cm²(6 pcs for spare)

9. Qty.: 2 sets

10. Work place: Indoor